Pressed Stainless Steel Sectional Water Tank

Pressed Stainless Steel
Sectional Water Tank

General Specifications

Standard :

Pressed stainless steel sectional water tank constructed with hydraulically pressed flanged panels

Materials :

The tank panel, tie rods, stays and cleats are made from Stainless Steel Grade 304/316

Flanges of Plates :

Tank panels pressed with a 90-degree panel flange to the face of the plate on four sides.

Bolts, Nuts and Washers :

SS 304/316 bolts, nuts and washer

Jointing Materials :

Non toxic PVC foam to be used for all jointing between tank panel flange

Tank Cover :

Panel type tank cover supported by trusses 600mm x 600mm square manhole and supplied as standard for each compartment

Water Level Indicator :

Nozzels for Connection :

Short pipe with flange or socket for all pipe connections

Ladder :

Internal ladder shall be made SS 304/316 and aluminium for external ladder, 300mm width

Skid Base:

Provided

Standard Thickness for 1.22 m x 1.22 m Tank Panel

TYPE	1.22 M (H)	2.44 M (H)	3.66 M (H)	4.88 M (H)
Tank covers	1.5 mm	1.5 mm	1.5 mm	1.5 mm
4th side panels				2.5 mm
3rd side panels			2.5 mm	2.5 mm
2nd side panels		2.5 mm	3.0 mm	3.0 mm
1st side panels	2.5 mm	2.5 mm	4.0 mm	4.0 mm
Bottom panels	2.5 mm	2.5 mm	4.0 mm	4.0 mm

Standard Thickness for 1.0 m x 1.0 m Tank Panel

TYPE	1.0 M (H)	1.5 M (H)	2.0 M (H)	2.5 M (H)	3.0 M (H)	3.5 M (H)	4.0 M (H)
Tank covers	1.5 mm	1.5 mm	1.5 mm	1.5 mm	1.5 mm	1.5 mm	1.5 mm
4th side panels
3rd side panels						2mm (1×1.5m)	2mm (1×1.5m)
2nd side panels				2mm (1×1.5m)	2mm (1×1.5m)	2.5 mm	3.0 mm
1st side panels	2.0 mm	2 mm (1×1.5m)	2 mm (1x2m)	2.5 mm	2.5 mm	3.0 mm	4.0 mm
Bottom panels	2.0 mm	2.0 mm	2.0 mm	2.5 mm	3.0 mm	4.0 mm	4.0 mm